FORK LIFT POWER UNITS 02
Marking: Non-standard (special-shaped) hydraulic power unit customized
This power unit is designed exclusively for the fork lift.consisting of high pressure gear pump, DC motor, multi-functional manifold, vavles,tank, ect. The up and down movements are controlled by the level of the manna I release valve, which is equipped with an electric switch for the motor start. The lowering speed is automatically adjusted by the pressure compensated flow control valve.
HYDRAULIC CIRCUIT DIAGRAM
|Model||Motor Voit||Motor Power||Rated Speed||Displacemea||System Pressure||Taak Capacity||Solenoid Valve Voit||L(mm)|
|1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity|
1.The duty of this power unit is S3,i.e.,30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil should be 15-68 cst, which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.0il changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5.The power unit should be mounted horizontally.