LIFT TABLE POWER UNITS 02

Short Description:


Product Detail

Product Tags

Marking: Non-standard (special-shaped) hydraulic power unit customized

Product introduction

This power unit is designed exclusively for small and medium lift table , which consists of high pressure gear pump , AC motor , multifunctional manifold , valve stank , etc . The lowering movement is activated by the solenoid valve with the speed controlled by the balance valve

OUTLINE DIMENSION:

download_01

HYDRAULIC CIRCUIT DIAGRAM

download_02

MODEL SPECIFICATIONS

Model

Motor Voit

Motor Power

Rated Speed

Displacemea

System Pressure

Taak Capacity

Solenoid Valve Voit

L(mm)

ADPU5-F1.6B3G2/LCAAD1

220VAC

1.5KW

2850RPM

1.6ml/r

20MPa

6L

12VDC

629

ADPU5-E2.1B3G2/LCABD1

 

 

 

2.1ml/r

16MPa

6L

24VDC

729

ADPU5-D2.5C3G2/LCACD1

 

 

 

2.5ml/r

12MPa

8L

24VAC

699

ADPU5-F2.1C4H2/LCADD1

380VAC

2.2KW

 

2.1ml/r

20MPa

8L

110VAC

699

ADPU5-E2.5D4H2/LCAED1

 

 

 

2.5ml/r

16MPa

10L

220VAC

769

ADPU5-E2.7E4H2/LCAED1

 

 

 

2.7ml/r

15MPa

12L

220VAC

869

Remark:
1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity.
2.The manual override function is available on request.
3.60HZ motors with CSA or UL cecation are available upon request

1 . The power unit is of S 3 duty , which can only be worked intermittently , ie . 1 minute on and 9 minutes off.
2 . Clean all the hydraulic parts concerned before mounting the power unit.
3 . Viscosity of the hydraulic oil should be 15-68 cst , which should also be clean and free of impurities . N46 hydraulic oil is recommended.
4 . Oil changing is required after the initial 100 operation hours , afterwards once every 3000 hours
5 . The power unit should be mounted horizontally


  • Previous:
  • Next:

  • Write your message here and send it to us