LIFT TABLE POWER UNITS 01

Short Description:


Product Detail

Product Tags

Marking: Non-standard (special-shaped) hydraulic power unit customized

Product introduction

This power unit is designed exclusively for large sized lift table, which consists ofhigh pressure gear pump, AC motor, multifunctional manifold, valves, tank, ect. Thelowering movement is activated by the solenoid valve with the speed controlled by thadiustable throttle valve

OUTLINE DIMENSION

download_01

HYDRAULIC CIRCUIT DIAGRAM

download_02

MODEL SPECIFICATIONS

Model  Motor Voit  Motor Power   Displacemea System Pressure Taak Capacity Solenoid Valve Voit L(mm)
Rated Speed
ADPU5-F2.5E3H2/LCCAG1 220VAC 2.2KW 2850RPM 2.5ml/r 18MPa 12L 12VDC 677
ADPU5-E3.2F3H2JLCCBG1 3.2ml/r 14MPa 14L 24VDC 727
ADPU5-D3.7G3H2/LCCCG1 3.7ml/r 12MPa 16L 24VAC 777
ADPU5-E3.7G412/LCCDG1 380VAC 3KW 3.7ml/r 16MPa 16L 110VAC 777
ADPU5-E4.2H412/LCCEG1 4.2ml/r 15MPa 20L 220VAC 877
ADPU5-D5J412/LCCEG1 5ml/r 12MPa 25L 220VAC 1002
Remark:
1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity.
2.The manual override function is available on request.

1.The power unit is of S3 duty ,which can only work intermittently and repeatedly and repeatedly,ie.,1 minute on and 9 minutes off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil shoud be 15-68 cst,which should also be clean and free of impurities.N46 hydraulic oil is recommenden.
4.This power unit should be mounted vertically.
5.Check the oil level in the tank after the first star of the power unit.
6.Oil changing is required after the initial 100 operation hours,afterwards once every 3000 hours.


  • Previous:
  • Next:

  • Write your message here and send it to us